VALVES

PRODUCT SELECTOR

SMART IN FLOW CONTROL

3599 - pneumatic - ANSI

Pneumatic control valve

Valve style
Axial valve

USAGE

  • On/off service
  • Throttling service
  • Low-pressure service
  • High-pressure service

VERSION
ANSI

MEDIUM TEMPERATURE
-60 to 200 °C / -76 to 392 °F

SUPPLY
Pneumatic

VALVE SIZE
NPS 4 to NPS 48

PRESSURE RATING
Class 150 to Class 2500

Lining
without

Special features

  • Pneumatic control valve
  • Suitable for liquids and gases
  • The plug is located axially in the flow path of the pipeline
  • Variety of cage designs to handle critical applications, e.g. to reduce noise or to control cavitation
  • Actuator mechanism protected from the process medium converts the rotational into a linear motion and provides maximum thrust for high control accuracy
  • Reduced actuator thrust/size through the use of an actuator mechanism and balanced plug
  • Low emissions due to rotating actuator stem
  • Linear or equal percentage characteristic
  • High Cv coefficients for valve sizes
  • Higher flow capacity possible in on/off valves without cage
  • Flanged body according to DIN, ANSI RF or ANSI RTJ

Accessories

  • - - -

Options

  • Stainless steel body
  • Special materials

The valve 3599 - pneumatic - ANSI can be combinated with the following actuations:

Special features:

  • Single-acting pneumatic diaphragm actuator for butterfly valves and other final control elements with rotary closure members
  • Direction of action (fail-open/fail-close) can be selected as required
  • Diaphragm area 160 or 320 cm²
  • Various signal pressure ranges
  • Travel stops externally adjustable to limit the opening angle
  • No special tools required for mounting and conversion
  • Signal pressures up to max. 6 bar
  • Connections according to DIN ISO 5211

Special features:

  • Double acting
  • Flat cover design
  • Stainless steel-to-stainless steel coupling to the signal transmitter
  • Exact scale to indicate the working range
  • Easy-to-service safety springs with corrosion protection
  • Springs to match the control pressure

Special features:

  • Single-acting and double-acting piston actuator
  • Suitable for strict requirements in chemical plants
  • Opening angle 90°
  • Signal pressures up to 10 bar
  • Torques from 5 to 11674 Nm
  • Temperatures from –40 to +80 °C
  • End positions adjustable within wide range (+5°/–15°)
  • Diagonal or parallel square drive position
  • Position indicator adjustable in steps of 45°
  • Encapsulated spring assemblies
  • Power transmission without clearance thanks to involute gearing
  • Direction of rotation reversible without requiring additional parts
  • Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
  • Centering ring milled into the housing
  • Standardized attachment of valve accessories according to VDI/VDE 3845 or NAMUR
  • Simple attachment according to DIN EN ISO 5211
  • Blow-out-proof travel stop screws
  • Fast stroking speeds as standard

Information

  • T 8080

    Type 3599 Axial Globe Valve
    ANSI version · DIN version
    [EN][DE][ES]

Certificates

Only up-to-date documents are shown in the product selector. Check the documentation site for a list of all documents available.

Pin product

Pin items on your list and contact us if you have any product-related questions.

WATCHLIST

Wallet is empty