VALVES

PRODUCT SELECTOR

SMART IN FLOW CONTROL

BR 26s - pneumatic - DIN

Ball valve

VALVE STYLE
Ball valve

USAGE

  • Low-pressure service
  • On/off service
  • High-pressure service

VERSION
DIN

MEDIUM TEMPERATURE
-196 to 550 °C / -320.8 to 1022 °F

SUPPLY
Pneumatic

VALVE SIZE
DN 50 to DN 800

PRESSURE RATING
PN 10 to PN 160

LINING
without

Special features

  • Consisting of ball valve and actuator
  • Steel or stainless steel ball valve
  • Corrosion-resistant materials to withstand corrosive process media
  • DIN ISO 5211 interface as standard
  • PTFE V-ring packing loaded by disk springs
  • TA Luft
  • Blow-out-proof shaft
  • Fire-safe according to API 607
  • Face-to-face dimensions according to DIN EN 558 or ASME B16.10/API 6D
  • Flanges according to EN 1092 or ASME B16.5/API 6D
  • Leakage requirements according to DIN EN 12266 or API 598

Accessories

  • Lever
  • Locking facility
  • Air filters

Options

  • Stem extension
  • Calibrated seals
  • Special materials
  • Metal sealing system
  • Gaskets live loaded on both sides
  • Trunnion-mounted ball
  • Metal seal in the passage
  • Heating jacket
  • Double packing with test connection
  • Grooved flanges according to DIN EN 1092
  • Fire-safe version
  • Version for granulate
  • Modified sealing systems
  • Non-stick coating on the inside of the body
  • Cleaning boreholes and cleaning nozzles
  • Low-temperature version
  • High-temperature version
  • High-pressure versions

BR 26s - pneumatic - DIN can be combinated with the following actuations:

Special features:

  • Rotary diaphragm actuator
  • Max. opening angle 90 ±3°
  • Signal pressures from 2.5 to 6.0 bar
  • Temperatures from –35 to +90 °C
  • Torques from 15 to 5619 Nm
  • Powerful thrust at high stroking speed and minimum friction by using low-wear rolling diaphragms
  • Backlash- and maintenance-free bearings
  • Direction of action (fail-open/fail-close) depending on the attachment to the rotary actuator
  • Travel stops externally adjustable to limit the opening angle
  • Excellent control properties thanks to large travel
  • Interfaces according to DIN EN ISO 5211 and VDI/VDE 3845

Special features:

  • Single-acting and double-acting piston actuator
  • Suitable for strict requirements in chemical plants
  • Opening angle 90°
  • Signal pressures up to 10 bar
  • Torques from 5 to 11674 Nm
  • Temperatures from –40 to +80 °C
  • End positions adjustable within wide range (+5°/–15°)
  • Diagonal or parallel square drive position
  • Position indicator adjustable in steps of 45°
  • Encapsulated spring assemblies
  • Power transmission without clearance thanks to involute gearing
  • Direction of rotation reversible without requiring additional parts
  • Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
  • Centering ring milled into the housing
  • Standardized attachment of valve accessories according to VDI/VDE 3845 or NAMUR
  • Simple attachment according to DIN EN ISO 5211
  • Blow-out-proof travel stop screws
  • Fast stroking speeds as standard

Special features:

  • Single-acting and double-acting piston actuator
  • Suitable for strict requirements in chemical plants
  • Opening angle 90°
  • Signal pressures up to 10 bar
  • Torques from 18 to 1702 Nm
  • Temperatures from –40 to +80 °C
  • End positions adjustable within wide range (+5°/–15°)
  • Additional pneumatic input at the top shaft end
  • Diagonal or parallel square drive position
  • Position indicator adjustable in steps of 45°
  • Encapsulated spring assemblies
  • Backlash-free force transmission thanks to involute gearing
  • Direction of rotation reversible without requiring additional parts
  • Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
  • Centering ring milled into the housing
  • Standardized attachment of valve accessories according to VDI/VDE 3845 or NAMUR
  • Simple attachment according to DIN EN ISO 5211
  • Blow-out-proof travel stop screws
  • Fast stroking speeds as standard

Information

  • AB FM 8.7-6

    Declaration of Contamination for Pfeiffer Vales and Components
    [EN][DE]
  • T 26s

    BR 26s · Ball valve
    With floating or trunnnion-mounted ball · DIN- and ANSI Version
    [EN][DE]

Support

  • EB 26s

    Ball valve BR 26s
    DIN and ANSI version
    [EN][DE]
  • SH 26

    BR 26a / BR 26d / BR 26e / BR 26k / BR 26s Ball Valve
    BR 22a Bottom Drain Ball Valve
    [EN][DE]

Certificates

Only up-to-date documents are shown in the product selector. Check the documentation site for a list of all documents available.

Pin product

Pin items on your list and contact us if you have any product-related questions.

WATCHLIST

Wallet is empty
Back to product selector